Remote Authentication Dial-In User Service
charter-ietf-radius-01

Document Charter Remote Authentication Dial-In User Service WG (radius)
Title Remote Authentication Dial-In User Service
Last updated 2000-07-06
State Approved
WG State Concluded
IESG Responsible AD ** No value found for 'group.ad_role.person.plain_name' **
Charter Edit AD (None)
Send notices to (None)

Charter
charter-ietf-radius-01

Background:

The original specification for and implementation of RADIUS was written
by Steve Willens of Livingston Enterprises in response to a need
outlined by the earlier NASREQ working group, and has been deployed by
multiple vendors over the past 3 years.

No other working group appears to be addressing the topic of
communicating authentication and authorization information between a
Network Access Server and a central authentication & authorization
server, and general consensus is that standardization of such a
protocol would be extremely useful.

This working group will produce four documents:

1) By early '96, an informational RFC documenting the RADIUS protocol
   already deployed for use by a Network Access Server (NAS) to
   communicate with a remote Authentication & Authorization database
   server, with minor amendments reflecting field experience of several
   implementations over several years at hundreds of sites.

2) By February '96, an informational RFC describing RADIUS Accounting.

3) By early '97, a full standard RFC documenting the RADIUS protocol,
   addressing any operational or security issues raised concerning the
   informational RFC. This document will obsolete goal 1.  (If the
   Internet-Draft for goal 1 is deemed suitable by the IESG for release
as
   a Proposed Standard instead of informational, then goals 1 and 3 will
   be merged.)

4) Starting in February '96 and concluding in '97, a RADIUS Extensions
   RFC documenting extensions for additional functionality within the
   RADIUS framework, which will be interoperable with the base RADIUS
   defined in the document for goal 3.

The intent in goals 1 through 3 are to document the protocol as it
exists and is used currently, in such a way as to allow interoperable
implementations to be written from the RFC.  Minor modifications to
enhance interoperability or operation based on field experience are
suitable, major overhauls are outside the scope of this working group's
charter.  Goal 4 is to provide a mechanism for additional features
deemed widely useful to be added to the existing framework, for example
to provide better support for EAP.

Clearly outside the scope of the charter are the following:

1) NAS Standardization is outside the scope.  We're defining standard
   RADIUS, not a standard encompassing everything about network access
   servers.  This effort does not require NASes to implement RADIUS; it
   just defines how the RADIUS Protocol works on NASes that do
   implement RADIUS.

2) RADIUS is not intended as a NAS management protocol; SNMP already
   exists for that.

3) Management of the Authentication/Authorization database itself is
   outside the scope.

4) Alternative transport protocols such as IPX or IPv6 appear
   straightforward, but will not be addressed in this effort.

5) The flexibility and generality of RADIUS have led to its use for
   other applications, but this Working Group is addressing only those
   uses involving user dial-in to Network Access Servers.